Lift the handle out of the head & wipe shaft clean. Place the metal rod (provided with new wheel) in the back right hand side of the wheel and wind the handle anticlockwise until the handle becomes loose. We recommend the change the wheel and blade at least every 1,500 cans.Ĭhanging a wheel on a Classic, EZ20, EZ40, EZ 60 and Titanĭo not remove the trigger mechanism on EZ models.Įngage the handle into operational mode (down position) Over time the grip of the wheel will wear due to friction caused while rotating cans, this will lead to the wheel slipping against the can rim. We recommend that wheels are changed at the same time as changing the blade to optomise performance of the product. How to Change the Bonzer Can Opener Wheel Push handle in the opposite direction from normal use and re-insert the trigger mechanism into the head of the can opener. Replace with new blade ensuring the ‘Bonzer®’ stamped side faces against the trigger mechanism( label on blade will be faces outwards) Loosen screws until blade is free – no screwdriver required Remove the Trigger mechanism from the head of the can opener and release the handle which will move to an upright position The trigger mechanism commonly known as the blade carrier will release Push handle in the opposite direction from operational use. Slide metal rod back into position and insert the pin to secure.Ĭhanging a blade on a EZ 20, EZ60 and TitanĮnsure can opener is sitting in base in the correct position for use Tighten screws and replace in head, ensuring metal rod and pin are secure. Replace with new blade ensuring the Bonzer® text faces the trigger mechanism (label on blade will be facing outwards towards you) Loosen screws till the blade is free from trigger mechanism Grip Blade carrier and remove from trigger mechanism Replace with new blade ensuring the Bonzer® text faces upwards (label on blade will be facing towards the can opener) Remove screws holding the blade in position How to Change the Bonzer Can Opener Blade

How to use a can opener